Click image to view full size image
Carbon Steel Gas filter separator with cartridge to remove solids and mesh pad to remove mist
Quick Detail:
- Pressure relief valve
- Sight glass/level gauges with gauge cock
- Liquid level controller
- Pressure indicator
- Temperature indicator connection
- Instrument gas supply drip pot
- Instrument gas header
- Pressure safety valve
- High/low pressure regulator
- Lifting lugs for safe handling
1,BOCIN-500series gas filter separator
Description >>
BOCIN 500 Series filter separator is mainly used in the need for efficient removal of solid and liquid particles , regardless of the particle size these also can be applied. Filter separator is particularly suitable for removing dust and smoke which is extremely small. Its wide range of applications, including eliminating lubricants from processing air, removing impurity from upstream gas pipelines in regulator stations and compressor stations and removing ethanol from the gas after dehydration and etc. Series 500 Separating filter is combined by BOC mesh demister and BOC coalescence elements. the droplets more than 3-5μm can be 100% separated; between 0.5 ~ 3μm droplets can be 99%separated , and the solid particles 0.5μm are 99% filtered.
Technical parameters >>
1 Work pressure: 0.1~40.0Mpa 2 Work temp: -40~+300
3 Separate accuracy: 0.3,1,3,5μm 4 Separate efficiency: 99.98%
5 Max flowrate: 6500000Nm3/h
Parameters >>
1 Design code ASME sec. vill div.1
2 Available material: Carbon steel, SS316/304...
3 Finish: Blasted and painted for cs glass bead for ss vessels, or to meet spec.
4 Bolts and hex nuts: Plated carbon steel,or to meet specification
5 O’RINGS: buna n or epdm standard viton, TEV or other optional
Options >>
Quick open blind plate(insert type,hooptype,locked ring type)
